- Rupture de stock
Kärcher Submersible dirty water pump SP 7 Dirt Inox (1.645-506.0)
Livraison gratuite
Droit de retour dans les 14 jours
Achat sur Facture (en 1 à 3 fois) sans frais
An individually controlled level sensor starts the drainage pump SP 7 Dirt Inox contact with water immediately. If the water level falls back below the level sensor, the pump will automatically stop after 15 seconds. The extremely powerful submersible pump is ideal for dewatering, for example, large garden ponds, flooded basements or flooded pits (max. 100 m), as they greatly polluted water (up to 30 mm large dirt particles) with up to 15,500 l/h can pump reliably. For even more polluted water of integrated and tie-down Edelstahlvorfilter for protection against clogging serves. Per automatic-manual switch allows the submersible pump and switch to continuous operation. They reliably pumps out up to a residual water height of 35 millimeters - both in continuous operation and in automatic mode, with a corresponding adjustment of the level sensor. With the QuickConnect hydrants can 1", 1 1/4" and 1 1/2" hoses are connected quickly and easily. Thanks to stainless steel housing and a robust mechanical seal, the pump is of particularly high service life Optional is a warranty extension to 5 years possible.
Technical Data
Flow rate, max. (l/h) | 15500 |
Flow height, max. (m) | 8.0 |
Pressure, max. (bar) | 0.8 |
Grain size of dirt particles that can be transported max. (mm) | 30 |
Motor rating, max. (W) | 750 |
Delivery temperature, max. (° C) | 35 |
Connection thread | G1 1/2 |
Power cable (m) | 10 |
Switch on/off height (cm) | 5,5-24 |
Minimum fluid height (manual mode) (mm) | 50 |
Residual fluid height (mm) | 25 |
Frequency (Hz) | 230-240 |
Voltage (V) | 50 |
Weight without accessories (kg) | 6.7 |
Dimensions incl. accessories (L x B x H) (mm) | 230 x 285 x 354 |
Standard accessories
- 1 x Connection piece (for G1 1/2-thread)
- 1 x Connection piece (for 1", 1 1/4" or 1 1/2 hose connection)